Skip to main content
Bigfoot 1300mm - PNPGood Stocks – Available for same day despatch Mon–Fri if ordered before 2pm.
Click to enlarge

Arrows Hobby Bigfoot 1300mm - PNP

Good Stocks – Available for same day despatch
Mon–Fri if ordered before 2pm when possible.

Stock code ARR0010P

Arrows Hobby

RRP £185.00 £166.99

Arrows Hobby Bigfoot 1300mm PNP

With it's large "tundra" style tire's this new release from Arrow Hobby offers all season, all terrain take-off's. Plus with great all-round performance this is simply one model that has something to offer everyone. Easy to fly, docile, sedate and tough, it’s a perfect training platform for beginners; just reduce the rates, go easy on the power and it’ll look after your circuits and bumps all day long. But that’s only the half of it, if you up the control surface movement, bang the sticks in the corners and give it beans, there’s almost nothing that this versatile high-winger won’t do. From hovering to wild aerobatics and even knife-edge it really is a model with a flight envelope that’s waiting to be explored. And, of course, tundra tyres, big flaps and plenty of power give it an everyday bung in the boot versatility that’ll have you reaching for your Bigfoot time and time again, particularly when other models seem a little too much hassle. Presented in a pseudo Cessna colour scheme and sporting a full suite of landing and navigation lights this capable STOL machine not only flies well, it looks well too and will comfortably keep you airborne long into the evening.

Spanning 1300mm, taking a basic 5-channel radio and using a humble 3S 2200mAh battery it’s light on cost too, not least because it comes fully equipped with a powerful brushless outrunner, ESC, servos and pre-connected flying surfaces. Into the air within minutes of opening the box there’s little to stand in your way of owning (arguably) the finest foamie sportster on the market. Make an impression with a Bigfoot.

(See below for recommended items required to complete)

What's in the Box

  • 1x Factory assembled and painted fuselage with pre-applied decals.
  • 1x Factory assembled and painted 2-piece wing with decals applied.
  • 1x Factory assembled and painted tail set with pre-applied decals.
  • 1x Pre-installed 3536 850KV motor.
  • 1x Pre-installed 30A ESC with XT60 connector.
  • 1x Undercarriage unit with wheels.
  • 1x 2-blade propeller (11 x 7").
  • 1x Wing spar.
  • 1x Screw and pushrod set.
  • 6x Pre-installed high quality 9g servos.
  • 1x Y-lead and strut clip set.
  • 1x Comprehensive instruction manual.
  • Wingspan: 1300mm (51.1in)
  • Length: 1060mm (41.7in)
  • Flying Weight: Around 1310g
  • CG (Center of Gravity): 60-70mm from leading edge
  • Power System: 3536-850kV
  • Electronic Speed Control: 30A
  • Propeller : 11 x 7 2-blade
  • Servos: 9 gram servo x 6
  • Landing Gear: Fixed
  • Required Battery: 3S 2200mAh Li-Po
  • Required Radio: 5+ Channel transmitter and receiver required
  • Ailerons: Yes
  • Elevator: Yes
  • Rudder: Yes
  • Flaps: Yes
  • Lights: N/A
  • Hinge Type: Foam
  • Material: EPO foam
  • Skill Level: Beginner

(See below for recommended items required to complete)